2 ARDBOX FAMILY GUIDE A compact PLC based in Open Source Hardware technology. With different Input/Outputs Units. COMPACT PLC ARDUINO 24Vdc ARDBOX RELAY ANALOG MODEL TYPE Input Voltage 24Vdc Max. current 0,5A Size 100x45x115 Clock Speed 16MHz Flash Memory 32KB of which 0,5KB are used by bootlader SRAM EEPROM I2C up to 127 elements.
3 Technical Specifications 3.1 General Specifications: Item RELAY ANALOG Power supply DC power supply 24Vdc voltage Operating DC power supply 20.4 to 25.4Vdc voltage range Power DC power supply 30VAC max. consumption Power supply voltage 24Vdc External power supply Power supply output 700Ma capacity 20MΩ...
4 I/Os Pinout PINOUT ARDBOX PNP ARDBOX ANALOG ARDBOX RELAY ARDBOX TCH Left side LP00 Digital Input Q0.6 Analog/PWM/ LP00 Relay 1 Out LP00 Digital Input LP01 Digital Input digital Output LP01 LP01 Digital Input LP02 Digital Input Q0.5 Analog/PWM/ LP02 Digital Input LP03...
LEDS ARDBOX PNP ARDBOX ANALOG ARDBOX RELAY ARDBOX TCH RP00 Q0.1 Analog/PWM/Dig. Out LP01 Digital Input RP01 Digital Input Q0.0 Analog/PWM/Dig. Out LP00 Digital Input RP02 Digital Input Q0.3 Analog/PWM/Dig. Out RP04 Digital Input LP03 Digital Input RP03 Digital Input Q0.2 Analog/PWM/Dig.
6.2.3 Digital/Analog Output configurable: Some pins can work in three different modes. Analog and Digital output signal. IMPORTANT: to have the switch in correct position. 6.2.3.1 Switch position Analog/PWM/digital Out: Vout 10Vdc 24Vdc * With 10Vdc configure, you can use Digital signal or Analog Signal: 6.2.3.2 Digital Output: Configure by software for work like digital form: High or Low level.
6.2.3.3 PWM Output: Configure by software for work using PWM in range value: 0- 255. 6.2.3.4 Analog Out: Configure by software for work using PWM in range value: 0- 255. 7 How to connect communication signals: Ardbox PLC’s family provides a RJ12 connector so several communication types can be used.
Page 11
Pin number Analog V2 Colour Pin 1 Blue Pin 2 Yellow Pin 3 Green Pin 4 5Vdc Pin 5 Black Pin 6 White Different communication modes can be used with the RX and TX pines, since these allow RS485, RS232 serial communication, as well as several communication protocols such as Serial o Modbus.
8 How does it work: 8.1 Input signals 8.1.1 Analog/Digital Input CONFIGURABLE : You can turn on (Digital mode) or turn off (Analog mode) the configurable switch. Analog / Digital input configuration scheme 8.1.2 Isolated Digital Input: Use COM pin like Isolated GND. Isolated Digital input scheme 8.1.3 Digital Input: Digital input scheme...
“document files” section and then open it with Arduino IDE. Configuration of Arduino IDE: All Ardbox PLCs use an Arduino Leonardo and you need to choose these option in Arduino IDE. About Industrial Shields: SPAIN Avda. Castell de Barberà 26, nave 9 08210 Barberà del Vallès (Barcelona) Tel.+34 635693611...