Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Attero Tech Axiom Series
- Page 1 Audio Extension I/O Modules Attero Tech LLC 2019 614-00063 Rev 01 8/2019...
- Page 2 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by Attero Tech 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
- Page 3 Should any defect develop, Attero Tech, LLC will, at our option, repair or replace any defective parts without charge for either parts or labor. If Attero Tech, LLC cannot correct the defect in the equipment, it will be replaced at no charge with a similar new item.
-
Page 4: Table Of Contents
Contents 1 – Axiom Bus Overview ..........................................1 2 – ML1 – Overview ............................................1 2.1 – ML1 – What’s in the Box ................................1 3 – Device Installation ..........................................2 3.1 ML1 – Mounting ..................................2 3.2 – Signal Metering LED Indications .............................. 3 3.3 –... - Page 5 Axiom Port Pair: Color Pair: Color Function The Attero Tech Axiom bus is a proprietary analog extension solution that leverages unshielded twisted pair cabling (CAT 5/6) to transmit 2 balanced audio channels, RS-232 control and 24VDC 3: Green/White 2: Orange/White Analog Audio 1+ power for audio signal extension applications.
-
Page 6: Axiom Bus Overview
– ML1 – Overview Figure 2 - Product Overview Figure 3 - Product Overview Figure 1 – ML1 Front Panel Description The Axiom ML1 provides an installation friendly simple to operate analog audio extension solution for analog mic and line level Gain Adjust Knobs sources in cost-sensitive applications such as small and medium sized retail, restaurant, education, and hospitality venues. -
Page 7: Device Installation
ML1 may be mounted in larger gang boxes with other single gang form factor products to provide flexible AV system modularity where needed. *Note: CAD drawings can be downloaded from the Attero Tech website. Please contact Attero Tech for any further product related information that accessible on the website. -
Page 8: Signal Metering Led Indications
3.2 – Signal Metering LED Indications 3.4 - Device Configuration and Workflow The ML1 is equipped with two LED indicators below the rotary Overview encoders for each the ¼”/XLR Mic input and the 3.5mm line input. following chart indicates available status The ML1 may be configured for single use, or daisy-chained with information:... -
Page 9: Axp2O - Overview
RS-232 Terminal Block Axiom port - Supports connectivity to any Power Status LED Attero Tech Axiom endpoint. 24V DC Power Input RS-232 - Provides RS-232 connectivity to control systems for extending control to supported Axiom products ( limited to one control enabled Axiom... -
Page 10: Mounting
With the AXP2O powered off, attach the CAT cable from the Axiom port of the AXP2O to the RJ45 on the Axiom device. *Note: CAD drawings can be downloaded from the Attero Tech website. Please contact Attero Tech for any further product Apply power by plugging in the 24V DC power supply to the DC related information that is not accessible on the website. -
Page 11: Audio Connections
4.4 – Audio Connections 4.5 – 3 Party Control The AXP2O provides balanced audio outputs to external analog The RS-232 port on the AXP2O break-out box is intended for audio equipment. Refer to the following diagrams for connecting connectivity to 3 party control systems for extended integration the outputs of the AXP2O to audio devices. -
Page 12: Architects & Engineers Specification
The device shall support mounting the mounting of multiple units side by side in a multi-gang wall box or one unit in a single gang US wall box. The unit shall be the Attero Tech Axiom ML1 product. AXP2O The device shall have an 8P8C connector for connectivity to Axiom bus compatible products. -
Page 13: Device Specifications
Device Specifications ML1 Specs Audio Inputs (Mic/Line) Axiom XLR – ¼” Combo Connector Type Physical Layer Analog Audio, RS-232 Control, 24V DC Power Gain 0 to 50 dB Connector (s) 8P8C Input Impedance >2kOhms at any gain (mic) >10kOhms Line Cable Quality CAT-5e or better, UTP Power Specifications...
Need help?
Do you have a question about the Axiom Series and is the answer not in the manual?
Questions and answers