Page 1
TURBINE VERSION KT84_rev01 IMPORTANT The turbine version of the KT84 Tortuga is a high-performance model that requires an expert pilot. If you do not think you have the necessary experience, please contact SAB (support@sabitaly.it). IMPORTANT The KIT is "easily" compatible with Lambert Kolibri T 15,25,35 micro turbine. Bigger turbine may require the fuselage cut.
Page 2
KT84 TORTUGA TURBINE VERSION KT84_rev01 INSTALLATION OF THE TANK We suggest to add some velcro as shown in Fig 3 for the perfect fit of the tank to the fuselage. Install the tank as shown in Fig 4. We suggest to fix the tank with a bit of hot glue only in the front zone.
Page 3
KT84 TORTUGA TURBINE VERSION KT84_rev01 INSTALLATION OF THE COMPONENTS Follow the pics no. 5,6,7. Page 3...
Page 4
KT84 TORTUGA TURBINE VERSION KT84_rev01 Tank Vent Socket Head Cap Screw M2.5x10mm (HC022-S) Accessories Support Finishing Washer M2.5 (H0255-S) Note: Make 2 holes of 3mm in according with your installation. RECOMMANDATION Tortuga turbine version can fly easily over 300 km/h It is important to minimize the play of all moving parts to achieve maximum flight accuracy.