Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Barco Pulse
Summary of Contents for Barco Pulse
- Page 1 Pulse Remote Control Unit User Guide R5906134/00 15/05/2017...
- Page 2 Registered address: Barco NV President Kennedypark 35, 8500 Kortrijk, Belgium Phone: +32 56.23.32.11 Fax: +32 56.26.22.62 Support: www.barco.com/en/support Visit us at the web: www.barco.com Barco NV Beneluxpark 21, 8500 Kortrijk, Belgium Phone: +32 56.23.32.11 Fax: +32 56.26.22.62 Support: www.barco.com/en/support Visit us at the web: www.barco.com...
-
Page 3: Disposal Information
Changes Barco provides this manual ’as is’ without warranty of any kind, either expressed or implied, including but not limited to the implied warranties or merchantability and fitness for a particular purpose. Barco may make im- provements and/or changes to the product(s) and/or the program(s) described in this publication at any time without notice. - Page 4 Barco. If the purchaser or a third party carries out modifications or repairs on goods delivered by Barco, or if the goods are handled incorrectly, in particular if the systems are operated incorrectly or if, after the transfer of risks, the goods are subject to influences not agreed upon in the contract, all guarantee claims of the purchaser...
-
Page 5: How To Install
Image 1-2 3. Insert (1) both lower tabs of the battery cover in the gaps at the bottom of the remote control, and press (2) the cover until it clicks in place. Image 1-3 R5906134 PULSE REMOTE CONTROL UNIT 15/05/2017... - Page 6 Purpose of the remote control on/off button The Pulse remote control unit has at the front side an on/off switch (reference 1 image 1-5). Switching off the remote control prevents that unwanted commands are send due to an accidental key press. Further- more, switching the RCU off will extend the battery life time of the remote control.
- Page 7 Connecting a cable with the XLR connector will reset the broadcast address of the RCU to its default value ’0’. How to use the XLR connector 1. Remove the XLR cover by pulling it backwards. R5906134 PULSE REMOTE CONTROL UNIT 15/05/2017...
- Page 8 1. Connect a cable with XLR plug into the mini-jack connector (reference 2 image 1-7) of the RCU. 2. Connect the other end of the cable with the mini-jack input of the projector. Image 1-7 R5906134 PULSE REMOTE CONTROL UNIT 15/05/2017...
Need help?
Do you have a question about the Pulse and is the answer not in the manual?
Questions and answers