Troubleshooting - Brabantia BBEK1116 Instruction Manual

3. Put your chosen ingredients into the grinder (as above picture shows). Please do not
overfill the grinder cup - fill about halfway
4. Attach the grinder cup/ blade base to the motor base. Turn clockwise and make sure
the safety lock is firmly in place.
5. The switch should be on 0 speed. Plug in and use pulse 2-3 times for pre-grinding.
Choose 7 speed for grinding.
6. Do not use continuously for more than 30secs at a time. Stop for 1min to let the
motor cool down before repeating.
7. After grinding is complete, turn the speed control knob to 0. Turn anti-clockwise to
take off the grinder. Turn the grinder container upside down and tap with moderate
force to make sure that all the ground contents fall into the container.
As per chart 1, dissasemble the grinder and remove the contents.
CLEANING
1. Please unplug the power cord to protect from electric shock while cleaning the
machine.
2. Do not immerse motor base and power cord in water.
3. All removable accessories can be cleaned in water except the motor base. Dry the
wet parts after cleaning.
4. Always store the machine in dry and ventilated place.
5. Do not use abrasive detergents to avoid damaging the appliance.
6. All plastic accessories and blades are dishwasher proof.

TROUBLESHOOTING

1. Problem: Machine doesn't work.
Solution: Ensure correct assembly. Make sure power plug is plugged in properly.
Check if the mains have tripped or if there is a power outage.
2. Problem: Machine stops running suddenly.
Solution: Processing bowl may loosen during vigorous processing. Please re-install
the bowl cover.
3. Problem: Motor is running, while components do not run.
Solution: Make sure the driving shaft is installed correctly.