Cadillac CT6 2020 Owner's Manual page 214

(1 mph), press SET to the first detent.
To decrease speed to the next 5 km/h
(5 mph) mark on the speedometer,
press SET to the second detent.
: Press to disengage ACC without
erasing the selected set speed.
: Press to select a following gap
time (or distance) setting for ACC of
Far, Medium, or Near.
The speedometer reading can be
displayed in either English or
metric units. See Instrument Cluster
(Base Level) 0 110 or
Instrument Cluster (Uplevel) 0 113. The
increment value used depends on the
units displayed.
Switching Between ACC and
Regular Cruise Control
To switch between ACC and regular
cruise control, press and hold
A Driver Information Display (DIC)
message displays.
ACC Indicator
When ACC is engaged, a green
indicator will be lit on the instrument
cluster. When the regular cruise
control is engaged, a green
indicator will be lit on the instrument
cluster.
When the vehicle is turned on, the
cruise control mode will be set to the
last mode used before the vehicle was
turned off.
Warning
.
Always check the cruise control
indicator on the instrument cluster
to determine which mode cruise
control is in before using the
feature. If ACC is not active, the
DRIVING AND OPERATING
Warning (Continued)
vehicle will not automatically brake
for other vehicles, which could
cause an accident if the brakes are
not applied manually. You and
Regular Cruise
others could be seriously injured or
Control Indicator
killed.
Setting Adaptive Cruise Control
J
If
J
get pressed and go into ACC when not
desired. Keep
not being used.
Select the set speed desired for ACC.
This is the vehicle speed when no
vehicle is detected in its path.
While the vehicle is moving, ACC will
not set at a speed less than 25 km/h
(15 mph), although it can be resumed
when driving at lower speeds.
To set ACC while moving:
1. Press
2. Get up to the desired speed.
3. Press and release SET .
is on when not in use, it could
J
off when cruise is
J
.
213