Subscribe to Our Youtube Channel
Related Manuals for b-mola NCCO1702/DMA
Summary of Contents for b-mola NCCO1702/DMA
- Page 1 Air Treatment Unit Operation Manual Model: NCCO1702 / DMA Please read and retain this manual prior to usage...
-
Page 2: Table Of Contents
PRODUCT SPECIFICATION DEAR VALUED CUSTOMER, Thank you for your purchase of the Air Treatment Unit NCCO1702/DMA. For your safety and to optimize the capabilities of this appliance, please read and retain this manual before operating the appliance; please keep it in a convenient and safe location for future reference. -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS Please read the following instructions before use. The appliance is designed for domestic usage and may only be operated in accordance with the following instructions. Warning 1. Do not expose the product to water and do not unplug the product with wet hands. 2. - Page 4 Safety Precautions Ensure that the power plug is connected to a correctly designated electric socket as specified on the rating plate. If the power cord is damaged, it must be replaced by the manufacturer or a qualified service agent. The appliance is not intended for usage by people with reduced physical, sensory or mental capabilities unless they are under the supervision of or have been given instruction by a person who is responsible for their safety.
-
Page 5: Parts And Components
PARTS AND COMPONENTS Illustration Diagram Front Filter Back A. Main Body F. Pre-filter K. Left-side air Outlet B. Right-side air Outlet G. Back Panel L. Control Panel C. NCCO Reactor H. Power Cord Inlet M. Power Cord D. HEPA Filter I. - Page 6 Control Panel ④ ① ② ③ ⑤ Power Button 4. Fan Speed Up Button Fan Speed Down button 5. ECO Mode Button Fan Speed Display...
-
Page 7: Installation Guide
INSTALLATION GUIDE Using the appliance for the first time: Read the instruction manual and retain for future reference. Remove all packaging, use a soft dry cloth to clean all the parts then re-assemble parts back together. Position the appliance on a dry, solid, level surface and ensure the appliance is provided is with reasonable space of at least 10 cm to operate effectively Check power sockets and any extension cords to confirm compliance with product requirements. -
Page 8: Operation Guide
OPERATION GUIDE 1. Power Button The power button is used to turn on/off the product. If you want to switch on/off the product, press the power switch. Fan Speed Display play shows the current fan speed. Fan speeds are ranged from 1 -10. “01”... -
Page 9: Operation Instruction
OPERATION INSTRUCTIONS 1. Power on / off Power on: Press power button to turn on the appliance. An alert tone will be on to signal that the machine is connected to electricity. Power off: Press the power button to turn the appliance off. 2. - Page 10 5. ECO Mode Press the rightmost button on control panel to turn on the energy- saving mode, the display shows "Eo". When entering this mode, machine will automatically switch to a lower fan speed and all lights will be dimmed. To Activate: Press the button “ECO”...
-
Page 11: Filter Care And Replacement
FILTERS CARE AND REPLACEMENT 1. Filter lifetime may vary depends on environment, usage and location of the appliance. 2. To maintain optimal performance, only use recommended filters. 3. It is recommended to clean the pre-filter regularly. 4. Always disconnect appliance from the power supply before disassembling. 5. -
Page 12: Cleaning And Maintenance
CLEANING AND MAINTENANCE Always disconnect the appliance from the electricity socket before cleaning or replacement of the filters. Always clean the pre-filter to maintain the performance of the appliance. Replace HEPA Filter regularly to maintain the performance of the appliance. Do not wipe or clean the HEPA Filter or NCCO Reactor with water. -
Page 13: Trouble Shooting
TROUBLE SHOOTING Problems Resolutions Check if the device has been plugged in. The appliance does not operate Start up the device. Appliance is “beeping” in sound and Check if the Filters are installed correctly. does not operate. Reinstall all Filters Check if the power cord is connected and plugged properly. -
Page 14: Product Specification
PRODUCT SPECIFICATION Power Supply (V/Hz) AC110-240V/50-60Hz Low speed Power Consumption Mode High speed strong wind Low speed <80 Air flow High speed Mode (m3/hr) strong wind Low speed Noise level High speed Mode (dB) strong wind 40-60 Applicable Room Size (m2) Dimensions (length x width x height) 300 (L) *210(W)*480(H) (MM)
Need help?
Do you have a question about the NCCO1702/DMA and is the answer not in the manual?
Questions and answers
What does HP mean? Hepa filter?