Oracle 1242 Getting Started Manual

Oracle Rack Cabinet 1242 Getting Started Guide
®
This guide describes how to move and set up the Oracle Rack Cabinet 1242 and provides safety guidelines you must
follow when working with the rack. For complete rack installation and service procedures, refer to the Oracle Rack
Cabinet 1242 User's Guide at:
http://www.oracle.com/goto/oraclerack1242/docs
For instructions on installing and cabling servers or equipment in the rack, refer to the equipment documentation.

Observing Safety Guidelines and Cautions

1. Read the important hardware safety documents.
2. Use professional movers when unpacking and installing the rack.
3. Follow the procedures in the Oracle Rack Cabinet 1242 User's Guide and Oracle Rack Cabinet 1242 Power
Distribution Units User's Guide.
4. When installing or servicing equipment in the rack, extend the anti-tilt bar and take antistatic precautions.
5. Load the heaviest items first from the bottom of the rack up. Secure each item before installing another item.
6. Ensure that the rack is adequately stabilized before servicing installed equipment, and extend only one piece of
equipment out of the rack at a time.
7. For additional safety guidelines and warnings, refer to the online documentation.

Unpack the Rack

1. Remove the rack from its packaging container. Refer to the unpacking guidelines on the
cartons [1-4] and the unpacking procedures in the Oracle Rack Cabinet 1242 User's Guide.
2. Unload the rack from the shipping pallet. [5-7]
1