Playing A Dvd Video - Sony PS2 Instruction Manual

Playing a DVD video

Playing a DVD video
Depending on the DVD video, some operations
may be different or restricted. Refer to the
instructions supplied with your disc.
1 Turn on the console using the
MAIN POWER switch on the
back of the console.
The 1 (standby) indicator on the
front of the console lights up in red
to indicate that the console is now in
standby mode.
Press the 1 (standby) /RESET
2
button.
The 1 indicator turns green and the
start-up screen appears.
Press the A (open) button.
3
The disc tray opens.
4 Place a disc on the disc tray
with the label side facing up
(data side down).
Press the A button.
5
The disc tray closes and the console
starts playback.
Notes
• Depending on the DVD, a DVD menu or Title menu
may appear on the TV screen (see page 15).
• If you press the A button after playback, the Browser
screen appears.
If you experience problems playing a DVD video:
In rare instances, certain DVD videos may not operate
properly with PlayStation 2. This is primarily due to
®
variations in the manufacturing process or software
encoding of the DVD video software. If you experience
problems, try restarting your DVD video. If problems
persist, for more information call the publisher of the
DVD video or contact SCEA's customer service.
Operating the DVD player directly with a controller
You can operate the DVD player directly with the buttons on a controller when the Control Panel
(page 14) is not displayed. You can also operate the DVD player using the DVD remote control (for
PlayStation 2) (sold separately). For detailed instructions, refer to the instruction manual supplied
®
with the SCPH-10171 DVD remote control (for PlayStation
This console is equipped with DVD Player software that is compatible with the DVD remote control
(for PlayStation 2). You can use the DVD remote control simply by inserting the IR receiver unit
®
(supplied with the DVD remote control) into a controller port of the console. No memory card (8MB)
(for PlayStation 2) is required when using the DVD remote control (for PlayStation
®
console.
L2 button: (Search)
(Page 16)
L1 button: . (Previous)
2
DUALSHOCK
Directional buttons:
Cursor control
L3 button*: (Subtitle Options)
(Page 15)
SELECT button: Display the Control Panel
(Page 14)
* When using a controller without the L3 or R3 button, select the
function using the Control Panel (see page 14).
To
Stop
Pause
Resume play after pause
Go to the next chapter in continuous play mode
Go back to the preceding chapter in continuous
play mode
You can also operate various DVD functions using the on-screen menu (Control Panel). For details,
see "Using the Control Panel" (page 14).
2) with IR receiver unit.
®
2) with this
®
R2 button: (Search)
(Page 16)
R1 button: > (Next)
¢ button: (DVD Menu)
(Page 15)
a button: Cancel / x (Stop)
✕ button: Enter
s button: (Title Menu)
(Page 15)
R3 button*: (Audio Options)
(Page 15)
START button:
N (Play) / X (Pause)
(Subtitle Options) function or the (Audio Options)
Operation
Press the a button.
Press the START button.
Press the START button.
Press the R1 button.
Press the L1 button twice.
Playback from the last
stopping point (Resume Play)
The DVD player remembers the point where
you stopped the disc, and you can resume
playback from that point.
1
While playing a disc, press the a button to
......
stop playback.
"Press [Play] to resume viewing. To start
from the beginning, press [Stop] and then
[Play]." appears, and then the Control
Panel (page 14) is displayed on the TV
screen.
If the message "Resume function cannot
be used here. Play will restart from the
beginning." appears, Resume Play is not
available.
2
Select N (Play) using the directional
......
buttons and press the ✕ button.
The DVD player starts playback from the
point where you stopped the disc in step 1.
To play from the beginning of the disc
After step 1, select x (Stop) and press the ✕
button. The point where you stopped playing is
cleared.
Select N (Play) and press the ✕ button.
Notes
• Resume Play may not be available on some DVDs.
• Depending on where you stop the disc, the console may
resume playback from a slightly different point.
• The point where you stopped playing is cleared when:
– you open the disc tray
– you shift to standby mode by pressing and holding
down the 1/RESET button on the front of the
console
– you turn the power off using the MAIN POWER
switch on the back of the console
– you start playback after selecting a title or chapter.
13
US