Sony LocationFree Player for PSP Manual page 9

Creating Basic Settings for
the LocationFree® Player
(Registering at Home)
You can register your PSP
Station and set to connect to a wireless LAN.
When you connect your PSP
Station via your router, set up according to the
following procedures.
1
Connect a PC to the Base Station and
follow the Setup Wizard to complete
the Wireless Mode Setup for CLIENT.
2
Turn on the WLAN switch of the PSP
system.
3
Connect your PSP
router. (For details, refer to the
Operating Instructions of the PSP
system.)
4
Updating your PSP
via the Internet.
5
Select under
menu, and then press the
system with the Base
®
system to the Base
®
®
system to the
®
®
system software
®
from the home
button.
The setting screen for use of LocationFree®
Player is displayed. Press the right button to
go to the next screen.
z
Tip
To re-register your PSP
Station or to register your PSP
another Base Station, you must perform [Basic
Settings] again (1 page 21).
6
Select [Start], and then press the
button.
9
system with the Base
®
system with
®