Craftright CRMSS-1950 Instruction Manual
  1. Manuals
  2. Brands
  3. Craftright Manuals
  4. Racks & Stands
  5. CRMSS-1950
  6. Instruction manual

Craftright CRMSS-1950 Instruction Manual

Universal mitre saw stand, suitable for mitre saws with up to 380mm wide base mounting points, folding legs for easy transport & storage, extendable supports: 940-1950mm, adjustable roller height: 810-920mm, roller width: 250mm, max. load capacity: 150kg
Hide thumbs
Table of Contents

Advertisement

Quick Links

UNIVERSAL
MITRE SAW STAND
Suitable for mitre saws with up to 380mm wide
base mounting points
Folding legs for easy transport & storage
Extendable supports: 940-1950mm
Adjustable roller height: 810-920mm
Roller width: 250mm
Max. load capacity: 150kg
INSTRUCTION MANUAL
WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
0918

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CRMSS-1950 and is the answer not in the manual?

Questions and answers

Summary of Contents for Craftright CRMSS-1950

  • Page 1 UNIVERSAL MITRE SAW STAND Suitable for mitre saws with up to 380mm wide base mounting points Folding legs for easy transport & storage Extendable supports: 940-1950mm Adjustable roller height: 810-920mm Roller width: 250mm Max. load capacity: 150kg INSTRUCTION MANUAL WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

  • Page 2: Specifications

    SPECIFICATIONS SPECIFICATIONS Folded Size: 935 x 545 x 805mm Length: 935mm (folded) 1950mm (extended) Height: 805mm (folded) 915mm (extended) Loading Capacity: 150kg Weight: 9.65kg KNOW YOUR PRODUCT Fasteners a. Bolts x 4 d. Hex Nuts x 4 b. Washers x 4 e.
  • Page 3 KNOW YOUR PRODUCT Mitre Saw Stand 1. Mounting Bar 8. Upper Leg Locking Pin 2. Fastening Slot 9. Stand Leg 3. Mounting Bar Handle 10.Extension Arm Fastening Knob 4. Extension Arm Locking Pin 11.Lower Leg Locking Pin 5. Roller 12.Extension Arm 6.

  • Page 4: Table Of Contents

    This stand serves as a workstation for holding mitre saws. WARNING! This stand is intended for use with mitre saws only. Do not use as a step ladder, stepping stool, storage rack, etc. Craftright will not be liable for damage or injury caused by improper use of this unit.

  • Page 5: Safety Instructions

    GENERAL SAFETY WARNINGS WARNING! Read all safety warnings and instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term ‘Power Tool’ in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool.
  • Page 6 • Craftright shall not be liable for any damage or injury resulting from such cases of misuse. • Craftright shall not be liable for any changes made to the Mitre Saw Stand nor for any damage resulting from such changes.

  • Page 7: Assembly

    ASSEMBLY Unfolding The Stand 1. Lay the mitre saw stand on the floor with the folded legs facing up. 2. Depress the leg locking button and unfold the 2 upper legs until the locking button clicks into place. 3. Repeat the same procedure for the other 2 legs.
  • Page 8 ASSEMBLY Attaching The Extension Arms 1. Slide the extension arms into the frame. 2. The locking pin on the extension arms should be facing inwards towards the centreline of the stand. You will need to depress this twice (once when the locking pin reaches the frame and again when it pops through the locating hole further in).
  • Page 9 ASSEMBLY Attaching The Mitre Saw Mounts 1. Depress the mounting bar handles and hook the opposite end of the mount onto the frame of the stand. 2. Lower the handles onto the frame and release them to lock the mounting bar into place. 3.

  • Page 10: Operation

    OPERATION Adjusting The Extension Arms 1. Turn the fastening knob on the frame counter-clockwise to loosen it. 2. Pull the extension arm out to the desired length. Note: The maximum extension length is reached when the arm locking pin clicks into place. To shorten the extension arm again, depress this pin and push the extension arm back into the frame.

  • Page 11: Maintenance

    NOTE: When transporting the Mitre Saw Stand in a vehicle, always tie it down to prevent movement and possible damage. NOTE: Craftright will not be responsible for any damage or injuries caused by the repair of the tool by an unauthorised person or by mishandling of the tool.

  • Page 12: Caring For The Environment

    CARING FOR THE ENVIRONMENT Power tools that are no longer usable should not be disposed of with household waste but in an environmentally friendly way. Please recycle where facilities exist. Check with your local council authority for recycling advice. Recycling packaging reduces the need for landfill and raw materials.

Table of Contents