Table of Contents
Advertisement
Quick Links
PM2.5 Monitor is an air quality controller which compatible with Z-Wave technology, it is mainly
used to monitor PM2.5 concentration in industrial, agricultural, and residence environment, while
monitoring the indoor temperature and humidity. Device can be included into any Z-Wave net-
work, and is compatible with any other Z-Wave certified devices.
Compatible with any Z-Wave network controller
Monitor PM2.5, temperature and humidity
High accuracy , good real-time performance and low cost
HIOTH TECHNOLOGY CO.,LTD.
HIOTH
PM2.5 Monitor
Introduction
Technical Information
User Manual
CT-EDZW4001-MH
PM2.5 Monitor
Advertisement
Table of Contents
Summary of Contents for Hioth CT-EDZW4001-MH
- Page 1 Device can be included into any Z-Wave net- work, and is compatible with any other Z-Wave certified devices. Technical Information Compatible with any Z-Wave network controller Monitor PM2.5, temperature and humidity High accuracy , good real-time performance and low cost HIOTH TECHNOLOGY CO.,LTD.
- Page 2 1. Device must be wall-mounted vertically. Do not lay it flat or upside down while working. 2. Do not mounted it in a wind gap, or cover its bottom, which may affect the detected data. PM2.5 MOTION INSTALLATION Follow the wiring diagram to insert all wires into right terminals and tighten screws. HIOTH TECHNOLOGY CO.,LTD.
- Page 3 86/60mm box, and 82mm is for American120mm box. Mount the panel back by aligning its tabs and card slot onto the bottom case. Tighten the fastening screw and the device is ready for normal work. Fig.2 Operation Button & Display is below: HIOTH TECHNOLOGY CO.,LTD.
- Page 4 Long press S1 & S3 until “- - -” displays on the screen. Then press S1 once, “- - -” flashing and device enters into learning mode. Choose "Z-Wave" to enter the Network Inclusion mode on the APP, then click " ". HIOTH TECHNOLOGY CO.,LTD.
- Page 5 S2 once can return to normal work. Fig.4 Association Group Device supports 1 association group. A gateway is suggested to associate with this group. The device will report to this associated device (gateway) when detected data changes: HIOTH TECHNOLOGY CO.,LTD.
- Page 6 Keep the device away from acid-base and other corrosive solids, liquids, gases, to avoid damage. Avoid overexertion during operation, to protect device from mechanical damage. Read all instructions and documentation and save for future reference. HIOTH TECHNOLOGY CO.,LTD.
Need help?
Do you have a question about the CT-EDZW4001-MH and is the answer not in the manual?
Questions and answers