Page 3
Instructions 1. Open the Gate by pulling it back Turn the Turbo wheel all the way to the RIGHT 3. With the reset tool, push down (reset) the 8 pins - you have 4 pins on one side, 4 pins on the other side.
Page 4
Left. Repeat the procedure until the lock is opened. With HU100-R if the operator doesn’t give a LOT of TENSION, the unlocking will be impossible, so give a LOT of TENSION 10. After you open the lock, turn the Turbo wheel to the LEFT, close...
Need help?
Do you have a question about the HU100-R and is the answer not in the manual?
Questions and answers