Table of Contents
Advertisement
Quick Links
Quick Start
MS-9 Laser Scanner
This guide is designed to get your scanner up and running
quickly. When connected to a host computer with Windows™
operating system (2000 or above), you can use ESP (Easy
Setup Program) to configure and control your MS-9 Laser
Scanner. In addition to ESP, you can send commands to your
scanner by serial command and by the scanner's embedded
menus.
For a full explanation of the MS-9's commands and features,
refer to the
Help section of ESP
or contact your Microscan sales
representative.
1
P/N 83-210047 Rev D
Advertisement
Table of Contents
Summary of Contents for ESP MS-9
- Page 1 (2000 or above), you can use ESP (Easy Setup Program) to configure and control your MS-9 Laser Scanner. In addition to ESP, you can send commands to your scanner by serial command and by the scanner’s embedded menus.
-
Page 2: Free Extended Warranty Offer
LIMITED TIME OFFER: ACT NOW! To receive a FREE extended warranty, product MUST be registered by the end-use installation facility within four months of the date of manufacture. Online registration is available at www.microscan.com/3year. MS-9 Laser Scanner Quick Start Guide... -
Page 3: Step 1 -Check Required Hardware
Hardware Required certain it does not have RTS/CTS connected to the host. • (4) IB-131 Interface Box, 99-400005-02 • (5) Power Supply, 97-100004-05 (120V), 97-100004-06 (240V) • (6) Object Detector (optional), 99-4400021-03 MS-9 Laser Scanner Quick Start Guide... -
Page 4: Step 2 -Connect The System
1. When wiring the IB-131 to a Host Computer that has a 25-pin connector, cross pins 2 and 3. When wiring the IB-131 to a Host Computer that has a 9-pin connector, do NOT cross pins 2 and 3. MS-9 Laser Scanner Quick Start Guide... -
Page 5: Step 3 -Install Esp
3. Click the Download Software link and extract the latest version of ESP to a directory of your choice. Note where your ESP.exe file is stored on your hard drive. 4. At the end of the install process, the following icon should appear on your desktop: 5. -
Page 6: Step 4 -Select Scanner Model
OK. 3. Click when the connect dialog appears. Note: If you need to select another model later, you can find it in App Mode under Model on the menu bar. MS-9 Laser Scanner Quick Start Guide... - Page 7 3. If the connection fails, enable a different Com Port, check con- nections, and try again. Tip: If you do not see the CONNECTED or DISCONNECTED message at the bottom of your dialog, try expanding the ESP window horizontally. MS-9 Laser Scanner Quick Start Guide...
-
Page 8: Step 6 -Position Symbol And Scanner
Scan line Scanner/Symbol Positioning Note: Code 39 is the default symbol type enabled. If you are uncer- tain as to your symbology type, enable all symbologies by selecting Auto Discriminate macro in Terminal mode. MS-9 Laser Scanner Quick Start Guide... -
Page 9: Step 7 -Test Read Rate
You can also find test symbols pack- aged with your Microscan Tools CD. By ESP After connecting to the reader, ESP will open in Setup Mode. 1. Click the Test button in Setup Mode to begin the read rate test. -
Page 10: Step 8 -Configure The Scanner
To return to Setup Mode, click the Setup Mode button. By Serial Command From your terminal program or the Terminal screen in ESP, you can enter serial commands and configuration and utility commands. Note: You can learn the current setting of any parameter by inserting a question mark after the number, as in <K100?>.
Need help?
Do you have a question about the MS-9 and is the answer not in the manual?
Questions and answers