Advertisement
1
Introduction to HI-PRO 2
The HI-PRO 2 Hearing Instrument Programming Unit together with fitting software
and programming cables constitute the complete HI-PRO 2 system. The HI-PRO 2
hardware serves as a standardized interface between a PC and programmable hear-
ing instruments.
Connection to the PC is by means of the supplied USB (Universal Serial Bus) cable.
The USB connection both establishes the electrical power and the data com-
munication between the PC and the HI-PRO 2.
On the cabinet front two 6-pole mini-DIN connectors for the cables to the pro-
grammable hearing instruments facilitate programming of both a left and a right
hearing instrument.
The PC software for programming the hearing instrument (Fitting Software) and the
cables for connecting hearing instruments to HI-PRO 2 are supplied by the hearing
instrument manufacturer.
1.1
Intended use
HI-PRO 2 is intended for audiologists, hearing instrument dispensers, and other
health care professionals.
The intended use is to make the necessary adjustments to programmable hearing
instruments connected to the HI-PRO 2 unit.
1.2
About this manual
This manual is your guide to installing and using HI-PRO 2. We strongly recommend
that you read this manual carefully before using HI-PRO 2 for the first time.
The manual contains a description of the main functions of HI-PRO 2. Otometrics
recommends that you make yourself familiar with the following issues in particular:
•
When you receive HI-PRO 2
•
Installation
•
Safety
1.2.1
Safety
This manual contains information which must be followed to ensure the safe per-
formance of HI-PRO 2. Local government rules and regulations, if applicable, should
4
►
6
►
18
►
5
Otometrics - HI-PRO 2
Hide quick links:
Advertisement
