The Showview System; Not Available On Slv-Se610N/K - Sony SLV-SE610K Operating Instructions Manual

2
1 2 3
4 5 6
7 8 9
0
CLEAR
3
PLAY
OK
INPUT SELECT
CLEAR
4
PLAY
OK
5
MENU
56 Recording TV programmes using the ShowView system (not available on SLV-SE610N/K)
Press the programme number
buttons to enter the ShowView
number.
If you make a mistake, press
CLEAR and re-enter the correct
number.
Press OK.
The date, start and stop times,
programme position or station name,
tape speed, and VPS/PDC setting
appear on the TV screen.
• If "– –" appears in the "PROG."
(programme) column (this may
happen for local broadcasts), you
have to set the appropriate programme position manually.
Press M/m to select the desired programme position.
To record from a decoder or other source connected to one or
more of the LINE inputs, press INPUT SELECT to display the
connected line in the "PROG." position.
You will only have to do this operation once for the referred
channel. The VCR will then store your setting.
If the information is incorrect, press CLEAR to cancel the setting.
If you want to change the date, tape
speed, and the VPS/PDC setting:
1 Press </, to highlight the item
you want to change.
2 Press M/m to reset it.
• To record the same programme
every day or the same day every
week, see "Daily/weekly recording" on page 57.
• To use the VPS/PDC function, set VPS/PDC to ON. For details of
the VPS/PDC function, see "Timer recording with VPS/PDC
signals" on page 57.
Press MENU to exit the menu.
SHOWVIEW
2 8 . 9
SHOWVIEW NO.
1 2 4 6 – – – – –
SET : 0–9
CONFIRM : OK
CANCEL : CLEAR
EXIT :
TIMER
2 8 . 9
DATE TIME
TODAY 1 9 : 0 0 2 0 : 0 0
SP / LP SP VPS / PDC
LIST
SELECT :
SET :
CANCEL : CLEAR
EXIT :
TIMER
2 8 . 9
DATE TIME
TODAY 1 9 : 0 0 2 0 : 0 0
SP / LP SP VPS / PDC
LIST
SELECT :
SET :
CANCEL : CLEAR
EXIT :
FRI
MENU
FRI
PROG.
3 5
OFF
MENU
FRI
PROG.
3 5
ON
MENU