Sony SLV-SE610B Operating Instructions Manual page 21

If your TV has a PERITEL connector
Press ?/1 (marche/veille) to turn on the VCR.
1
2
Press REGL CANAL on the VCR lightly.
REGLAGE
AUTO
The factory-preset RF channel appears in the display window.
The VCR signal is output through this channel to the TV.
REGL CANAL
3
Press CHAINE +/– to set the RF channel to OFF, and press REGL
CHAINE
CANAL again.
REGLAGE
AUTO
RF channel set up is complete.
REGL CANAL
?/1
REGL CANAL
CHAINE +/–
Tuning your TV to the VCR 21