Sony SLV-SE600A Operating Instructions Manual page 15

If your TV has a Scart (EURO-AV) connector
?/1 ON/STANDBY
1
Press ?/1 ON/STANDBY to turn on the VCR.
ON/STANDBY
2
Press RF CHANNEL on the VCR lightly.
AUTO
SET UP
The factory-preset RF channel appears in the display window.
The VCR signal is output through this channel to the TV.
RF CHANNEL
3
Press PROGRAM +/– to set the RF channel to OFF, and press RF
PROGRAM
CHANNEL again.
TRACKING
AUTO
SET UP
RF channel set up is complete.
RF CHANNEL
RF CHANNEL
PROGRAM +/–
Tuning your TV to the VCR
15