Sony SLV-SE50EE Operating Instructions Manual page 12

Step 3 : Connecting the VCR (continued)
About the SMARTLINK features (SLV-SE50EE only)
If the connected TV complies with SMARTLINK,
*1
MEGALOGIC
VIEW LINK *4 , you can use the SMARTLINK
function after you complete the steps on the
previous page (the SMARTLINK indicator appears in the VCR's display window
when you turn on the TV). You can enjoy the following SMARTLINK features.
• Preset Download
You can download your TV tuner preset data to this VCR and tune the VCR
according to that data in Auto Set Up. This greatly simplifies the Auto Set Up
procedure. Be careful, not to disconnect the cables or exit the Auto Set Up function
during the procedure.
See "Setting up the VCR with the Auto Set Up function" on page 16.
• TV Direct Rec
You can easily record what you are watching on the TV (other than tapes being
played on this VCR). For details, see "Recording what you are watching on the TV
(TV Direct Rec)" on page 38.
• One Touch Play
With One Touch Play, you can start playback automatically without turning on the
TV. For details, see "Starting playback automatically with one button (One Touch
Play)" on page 33.
• One Touch Menu
You can turn on the VCR and TV, set the TV to the video channel, and display the
VCR's on-screen display automatically by pressing MENU on the remote
commander.
• One Touch Timer
You can turn on the VCR and TV, set the TV to the video channel, and display the
TIMER menu automatically by pressing
• Automatic Power Off
You can have the VCR turn off automatically, if the VCR is not used after you turn
off the TV.
* 1 "MEGALOGIC" is a registered trademark of Grundig Corporation.
2
* "EASYLINK" is a trademark of Philips Corporation.
3
* "Q-Link" is a trademark of Panasonic Corporation.
4
* "EURO VIEW LINK" is a trademark of Toshiba Corporation.
Note
• Not all the TVs respond to the functions above.
12
Getting Started
*2
, EASYLINK , Q-Link
*3
, or EURO
TIMER on the remote commander.
SMARTLINK