Sony SLV-SE410K Operating Instructions Manual page 16

Additional connection
To a satellite or digital
tuner with Line Through
Using the Line Through
function, you can watch
programmes from a satellite
or digital tuner connected to
this VCR on the TV even
when the VCR is turned off.
When you turn on the satellite
or digital tuner, this VCR
automatically sends the signal
from the satellite or digital
tuner to the TV without
turning itself on.
1
Connect the satellite or digital tuner to the DECODER/LINE-2 IN
connector as shown above.
2
Set DECODER/LINE2 to LINE2 in the OPTIONS-2 menu.
3
Set POWER SAVE to OFF in the OPTIONS-2 menu.
4
Turn off the VCR.
To watch a programme, turn on the satellite or digital tuner and the TV.
Note
• You cannot watch programmes on the TV while recording unless you are recording
a satellite or digital programme.
16
Connecting the VCR
DECODER/
LINE OUT
tLINE-2 IN
Scart cable (not supplied)
: Signal flow