Table of Contents
Advertisement
Setup and connection
Location tips
• Select a stable, level base .
• Make sure that the environment is clean and free from
dust .
• Avoid placing the unit close to sources of heat or in
direct sunlight .
• Arrange the connector cables so that they do not pose
a trip hazard .
• Do not place any heavy objects on top of the cables or
the unit .
Audio input
You can also connect almost any audio source to the mini
jack plug socket 12 "Line In" on the back of the device
such as computers, MP3 players, video game systems,
televisions etc . The source device only needs an output
with line level . These outputs are configured as stereo
RCA jacks or as 3 .5 mm jack plugs . With a correspond-
ing connector cable, you can connect these devices to
the jack 12 "Line In" . You can purchase these cables in
our webshop (www .teufelaudio .com) in the "Accessories"
area .
Video output jacks
Some iPod models (e .g . iPod Touch) are also capable of
video playback and send the signal via the dock connec-
tor jack .
With the iTeufel
Magnum, this signal is still available
®
as always from the connector jacks 13 "Video" and 15
"S-Video" . You can connect a television via an RCA or
s-video cable in order to view images and movies from
the iPod on a large screen . Audio playback is emitted
from the iTeufel
Magnum .
®
Antenna
Danger Risk associated with lightning strike!
If you are using outdoor or roof antennas, be
absolutely sure that the antenna has lightning
protection .
Connect the antenna for receiving FM/USW stations
to the jack 16 "FM Ant . " in order to receive FM/USW
stations . This can be a roof/outdoor antenna or a cable
television connection . You will need a coaxial cable for
this .
If an antenna connection is not available at your setup
location, you can use the enclosed throw-out aerial
Unwind the throw-out aerial, insert the plug into the jack
16 "FM Ant . " jack and adjust the position of the throw-out
aerial until you have the best possible reception . Then fix
the antenna in place with tape .
8
• iTeufel
Magnum
®
Connecting to a power supply
Connect the jack 14 on the back of the device with a
power supply socket via the power cord
The Teufel logo on the front of the unit will illuminate in
red .
16
15
d
.
c
.
12 13
14
Advertisement
Table of Contents
