Sony SLV-SE100K Operating Instructions Manual page 9

If your TV has a Scart (EURO-AV) connector
Mains lead
to mains
: Signal flow
1
Disconnect the aerial cable from your
TV and connect it to AERIAL IN on
the rear panel of the VCR.
2
Connect AERIAL OUT of the VCR
and the aerial input of your TV using
the supplied aerial cable.
3
Connect LINE-1 (TV) on the VCR
and the Scart (EURO-AV) connector
on the TV with the optional Scart
cable.
This connection improves picture and
sound quality. Whenever you want to
watch the VCR picture, press t TV/
VIDEO to display the VIDEO
indicator in the display window.
4
Connect the mains lead to the mains.
Note
• If the TV is connected to the LINE-1 (TV) connector, setting the RF channel to OFF is
recommended. In the OFF position, only the signal from the aerial is output through the
AERIAL OUT connector (see page 13).
i LINE-1
AERIAL OUT
(TV)
Aerial cable (supplied)
Scart cable (not supplied)
AERIAL IN
AERIAL IN
IN
NTR
ARIAL
ANTNN
OUT
SORTI
IN
NTR
ARIAL
ANTNN
OUT
SORTI
Scart
(EURO-AV)
continued
Connecting the VCR
9