To select the channel map
If the program information signal
in your area has several channel
map patterns (up to 8), the
CHOOSE YOUR CABLE CH
MAP menu appears:
• the first time you turn on the
VCR after completing channel
mapping
• after selecting AUTO and
pressing OK on the SMART
CHANNEL MAPPING menu
In this case, you have to select the channel map on the CHOOSE YOUR CABLE CH
MAP menu.
1
Find the VCR Plus+ GOLD system Channel Listing in your program guide. For
details, see page 51.
2
Press M/m to highlight the channel map number you want by checking the
channel number in the program guide.
3
Press OK.
Notes
• It takes about one hour to complete channel mapping.
• The VCR can receive the program information signal only while the VCR is turned off and
no timer recordings are set.
• The VCR cannot set the guide channels correctly unless you enter the ZIP/POSTAL CODE in
your area.
• When you move to a different area, you must set up the VCR again and enter your new ZIP/
POSTAL CODE in the EASY SET UP procedure.
54
Setting up the VCR Plus+ GOLD system (SLV-N80 only)
Channel map
Station ID
number
SET VCR Plus+ CHANNELS
CHOOSE YOUR CABLE CH MAP
MAP
1
KCET
MAP
2
WNET
MAP 3
ABC
MAP 4
FAM
MAP 5
A&E
MAP 6
KAET
MAP 7
CBS
MAP 8
– – – –
SELECT :
SET
:
OK
QUIT
:
MENU
Channel number
4
5
1
3
9
8
1
2
0
2
3
2
9
4
–
–