Sony SLV-N650 Operating Instructions Manual page 30

To use the time counter
Press CLEAR at the point on the tape that you want to find later. The counter in the
display window resets to "00:00" or "0:00." To search for the counter 0:00:00 point
automatically, see "To search for the counter 0:00:00 point" on page 45.
To display the counter on the TV screen, press DISPLAY.
Notes
• Tapes recorded in the LP mode on other VCRs can be played back on this VCR but the
picture quality cannot be guaranteed.
• While displaying a menu on the TV screen, you cannot use H PLAY, X PAUSE,
M FF, m REW, or x STOP buttons.
• The counter resets to "00:00" or "0:00" (in the display window) or "0:00:00" (on the TV
screen) whenever a tape is reinserted.
• The counter stops counting when it comes to a portion with no recording.
• When 10 hours have passed, the counter in the display window returns to "0:00" and the
count starts over again.
• When playback does not start even if you insert a tape with its safety tab removed, set "Auto
play" in the ADVANCED OPTIONS menu correctly (page 47).
• This VCR can also play S-VHS tapes. The VCR will automatically identify the type of tape
inserted in the VCR (either VHS or S-VHS). When S-VHS tapes are played in the VCR, the
enhanced resolution will not be visible on screen; there may also be picture distortion while
playing the S-VHS tape in slow motion or while utilizing other special playback modes. The
VCR will not record in S-VHS mode on an S-VHS tape.
30
Playing a tape