Sony SLV-M11HF Operating Instructions Manual page 43

Tips
• The station ID appears on the TV screen only when you complete Smart Channel
Mapping and the VCR receives the program information signal (see page 54 of the
supplied hookup/setup manual).
• When the VCR receives the program information signal, the program name may
appear in place of the day of the week, recording start time and channel.
• You can manually name a recorded program and select the category. You can also
name the SmartFile tape (see page 53).
Notes
• If you don't set the clock or the clock isn't set to the correct time, the initial and
latest dates of use for the SmartFile, the recording date and day of the week, and the
recording start time won't be stored correctly on the SmartFile list.
• When you record a program using the normal recording mode while CABLE
MOUSE is set to ON in the CABLE BOX CONTROL menu, the channel number is
stored as "CH– – –".
• When you set AUTO TAPE SPEED to ON in the ADVANCED OPTIONS menu, and
the tape speed automatically changes from SP to EP during recording, the VCR
displays the entire recording time converted in SP mode to the SmartFile list.
• The recording time length in the SmartFile list is an estimation and may be slightly
different from the actual recorded time length.
continued
43
SmartFile Function