Step 3 : Hookups - Sony SLV-N51 Operating Instructions Manual

Step 3 : Hookups

Selecting the best hookup option
There are many ways in which your VCR can be hooked up. To hook up your VCR
so that it works best for you, first scan through the table below. Then use the
accompanying diagrams and procedures on the following pages to set up your VCR.
If your TV has audio/video inputs, refer to pages 10 and 11 for audio/video (A/V)
hookup. Then follow one of the hookups below. If your TV doesn't have A/V inputs,
do directly to one of the hookups below.
If you have
Antenna only, no cable TV
No cable box or cable box with only a few
scrambled channels
Cable box with many scrambled channels
After you've completed the connections, follow the instructions for setup.
After you've completed the setup, you're ready to use your VCR. Procedures differ
depending on the hookup you used. For an overview, refer to "Quick reference to
using the VCR" on the back cover.
Before you get started
• Turn off the power to all equipment.
• Do not connect the AC power cords until all of the connections are completed. If
you connect the AC power cord before the connections are completed, you may not
be able to use the Plug and Play function.
• Be sure you make connections firmly. Loose connections may cause picture
distortion.
• If your TV doesn't match any of the examples provided, see your nearest Sony
dealer or qualified technician.
Use
Hookup 1 (Plug and Play)
Hookup 2 (Plug and Play)
Hookup 3
Refer to
Pages 12 and 13
Pages 14 and 15
Page 16
9
Hookups