Download Print this page

Specification - Extreme Networks MiniBeacon BLE-2 Series User Manual

Digital broadcasting device

Advertisement

`
Extreme Networks
The robust MiniBeacon BLE-2 is an enterprise-level iBeacon with ARM core chipset nRF51822 and leverage
BLE
4.0 technology; it has a strong & waterproof case, accurate hardware and robust firmware. It is designed for
the commercial advertising and indoor location-based service.
Minew Beacons broadcast 2.4GHz radio signals at regular and adjustable intervals. MiniBeacon can be
heard and interpreted by iOS and Android BLE-enabled devices that are equipped with many mobile apps.
FEATURES
- Programmed MiniBeacon standard firmware
- Powered by 2pcs AA batteries, alkaline
- Omni-directional PCB antenna
- The max. 200 meters advertising distance
- Waterproof IP65
- Ultra-low power consumption chipset nRF51822 with ARM core
CERTIFICATIONS
- iBeacon MFi License (iBC-14-00582)
- FCC Regulation (FCC Part 15.)
- CE Regulations (Included EN300328/301489/60950/62479)

SPECIFICATION

Compatibility
- Supported iOS 7.0+ and Android 4.3+ system;
- Compatible with Apple iBeacon
- Compatible with all Bluetooth 4.0 (BLE) devices;
Long Battery Lifetime and Battery Level
- 5 years, with the default settings;
- LED will be flashing when battery low;
- Easy to get the real-time battery level notification;
Soft-reboot
- Reboot the device via command without any tools;
OTA and J-Link
- Supported upgrade via Over-The-Air;
- Reserved J-Link port on the board forprogramming;
Connection Mode
- Advertising mode, non-connectable;
- Configuration mode, connectable;
standard;
TM
Configurable Parameters
- UUID, Major, Minor, Device Name, Password etc.
- Special Configuration APP;
Transmission Power Levels
- 8 adjustable levels, range from 0 to 7
- Transmission power range: -30dBm to +4dBm;
Long Range
- The max. Range 200 meters in the open space;
- The range depends on the physical environment;
Security
- 8 characters password (Lock/Unlockparameters);
- Broadcast the encrypted data if needed;
- AES HW encryption
Mounting
- 3M branded adhesive for direct mounting to wall;
- Bracket for mounting on non-metal wall by
two-screw holds;
www.extremenetworks.com
i3 Robust MiniBeacon
Image 1
Page 2

Advertisement

loading

This manual is also suitable for:

Minibeacon lbs-ble-2auMinibeacon lbs-ble-2apMinibeacon lbs-ble-2luLminibeacon bs-ble-2lpMinibeacon lbs-ble-2au-8Minibeacon lbs-ble-2ap-8 ... Show all