Sony SLV-E580EG Operating Instructions Manual page 18

Step 6 : Setting the clock (continued)
3
• CURSOR
4
• CURSOR
5
• OK
Tip
• If you set AUTO ADJUST to ON, the Auto Clock Set is activated whenever the VCR
is turned off. The date and time is adjusted automatically by making reference to
the time signal from the station whose programme position is displayed in the
"CLOCK PROG" row.
If you do not need the Auto Clock Set, select OFF.
Note
• The menu disappears automatically if you don't proceed for more than a few
minutes.
18
Getting Started
Press CURSOR ?// to select ON.
Press CURSOR . to move the cursor (")
to CLOCK PROG, then press CURSOR
?// repeatedly until the programme
position of a station that carries the time
signal appears.
If the VCR does not receive the time signal
from any station, AUTO ADJUST returns
to OFF automatically.
Press OK.
CLOCK
2 7 . 1 . 1 1 9 9 8 FR 1 5 : 3 0
AUTO ADJUST [ ON ]
CLOCK PROG [ 1 ]
SELECT :
SET :
END : OK
CLOCK
2 7 . 1 . 1 1 9 9 8 FR 1 5 : 3 0
AUTO ADJUST [ ON ]
CLOCK PROG [ 2 ]
SELECT :
SET :
END : OK