Advertisement
Assembly Instruction
Please follow the schematic when to proceed to assembly. The schematic is attached to
the end of this guide.
IC Sockets
You can install IC sockets if necessary for easier maintenance. If you install the socket
for the oscillator, you can later swap the oscillator chip easily.
IFT (Coil)
Solder IFT's in the right positions.
Resistors
Start soldering from R1 to R7. It's advisable to measure the actual value using a
multi-meter before soldering.
R3 - Resistor
You can either use the 22kΩ fixed resistor for R3, or the bundled 25kΩ pot if you want
to variably control the gain.
Advertisement
