Settings for Saturday & Sunday (if different)
It is faster to program the same schedule for the entire week
and then modify the exception days eg weekends – Sat & Sun
If your Sat & Sun schedules are different from the rest of the
week then
•
Press on Day button until SA or SU is displayed
•
Press on PGM to select the respective program i.e. P1,
P2, P3 or P4 ( where you require to change the time)
Eg if you wish to change the times for P1 and P2 and
need to clear the times for P3 and P4
Select P1 and change the time using the Hour and Min
buttons
Select P2 and change the time as above
Select P3 and press the clear button to erase it
Select P4 and press the clear button to erase it
•
Mode/Ret to exit this function
Once you have completed the schedule for Saturday, you can
repeat the schedule for Sunday.
Ensure that the
Display.
If the manual icon can be seen, press the mode button again
you will now see the automatic icon
Your settings have now been programmed. The LCD display
will now show the following the comfort or economy
temperatures being used and the current program no. (i.e.
the active program) will also be shown.
If you are going to be away for an extended period then press
the vacation button for 3 secs until you see the suitcase icon
on the screen. The vacation temperature is set at 10 deg for
air and floor sensing thermostats.
To erase your program
Select PGM (and select the program to be erased i.e.
P1/P2/P3 or P4)
Ensure that you have selected the day and then press Clear
The time field will display --:-- showing that the program is
now inactive.
To reset the TH115 and start from the beginning:
Press and hold the
Position switch from ON to Standby and then to ON again.
Warning – please note that this will clear all programming.
To switch off the heating, move the ON/Standby switch to
Standby.
Automatic icon can be seen on the LCD
Points to note:
▲
***************************