Related Manuals for DentLight FUSION-DOE
Summary of Contents for DentLight FUSION-DOE
- Page 1 Setting New Standards through Innovation FUSION-DOE INSTRUCTIONS FOR USE LED Curing/Exam Combo Light System Powered by Patented Focus Beam Technology...
- Page 2 Product Information Description and Indications for Use Fusion-DOE Curing/Exam Combo Light System (Rev 5) is a high-power LED light device as a source of illumination for polymerization of photo-activated dental materials and fluorescent imaging for oral exams. FUSION light head covers the wavelength range of 420 – 490 nm and the violet DOE violet exam light head covers 390-430nm wavelengths.
- Page 3 Pulse Power Mode or adjust curing distance. CAUTION! Do not look directly at emitted light. Do not use FUSION-DOE without suitable eye protection for the operator, assistant, and patient. Use Light Shields, Goggles, and/or Curing Caps. Exposure must be restricted to the area of the oral cavity for which the clinical treatment is intended.
- Page 4 cycle. Built-in settings are shown in the table below. After starting, Digital Timer counts down and the light makes an audible beep every 5 seconds. Press ON/OFF Key anytime to stop. Select 60 seconds timer for oral exams using the DOE violet Light Head for early cancer screening and fluorescent caries detection.
- Page 5 To start tissue fluorescence examination, make sure patient always wear protective goggle (orange). Slide in the respective fluorescent shield into the handpiece. Direct and point light to illuminate target tissue spot at 1 to 3 inches distance away. Set timer to 60 seconds on pulse mode then press ON/OFF button to activate the light. Target Tissue Spot Illumination Fluorescence...
- Page 6 Optional Add-ons FUSION-DOE is the most advanced and versatile LED light system allowing users to perform beyond normal and composite curing and exams. You can implement additional advanced curing and therapeutic procedures by twisting and pulling out its modular light head and switch it for custom illumination.
- Page 7 This warranty is valid providing factory inspection indicates that any such defect was developed during normal and proper use. DentLight shall under no circumstances be liable for incidental, special, consequential damages and damage from misuse including the following expressed or implied: ...
- Page 8 Use of other spare parts and accessories other than from the manufacturer such as incorrect power adapter; Other acts which are not the faults of DentLight. For service, call 1-800-763-6901 (in US) to obtain RMA number. Fill out RMA form online and return as instructed. In case of a warranty claim, the complete apparatus must be returned.
Need help?
Do you have a question about the FUSION-DOE and is the answer not in the manual?
Questions and answers