Remote Control; Preparations; Prepare The Remote Control; Replace The Remote Control Battery - Otone SoundBase User Manual

User Manual

Remote Control

-
/
0
1
2
1
• Switch the unit between ON and STANDBY
mode.
2
• Select the play function.
,
3
H G
• Skip to previous/next track in Bluetooth
mode.
4
• Mute or resume the sound.
,
5
• Increase/decrease the volume level.
6 BASS
• Enable and disable the bass.
7 PAIR
BF /
• Play/pause/resume playback in Bluetooth
mode.
• Activate the pairing function in Bluetooth
mode or disconnect the existing paired
Bluetooth device.
6

Preparations

Prepare the Remote Control

The provided Remote Control allows the unit to
be operated from a distance.
Even if the Remote Control is operated
•
within the effective range (6m), remote
control operation may be impossible if
3
there are any obstacles between the unit
and the remote control.
If the Remote Control is operated near other
•
products which generate infrared rays, or if
other remote control devices using infra-red
rays are used near the unit, it may operate
incorrectly. Conversely, the other products
4 may operate incorrectly.

Replace the Remote Control Battery

1. Screw the cover to unlock then remove the
cover.
2. Remove the old battery from the battery
tray.
3. Place a new CR2025 battery into the battery
tray with correct polarity (+/-) as indicated.
4. Install the battery tray back into remote
control, then screw the cover to lock.
Precautions Concerning Batteries
• When the Remote Control is not to be
used for a long time (more than a month),
remove the battery from the Remote
Control to prevent it from leaking.
If the batteries leak, wipe away the leakage
•
inside the battery compartment and replace
the batteries with new ones.
First-time use:
The unit has a pre-installed
lithium CR2025 batter y.
R e m o ve t h e p ro t e c t i ve
tab to activate the remote
control battery.