Sony KDL-40HX800 Service Manual page 7

Model name KDL 55HX800
Power and others
Power requirement 110 V - 240 V AC, 50/60 Hz (U.S.A./Canada 120 V AC, 60 Hz)
Power consumption
in use
2
in DAM*
in standby Less than 0.12 W with 120 V AC and less than 0.2 W with 240 V AC
Screen size
(inches measured diagonally)
Display resolution 1,920 dots (horizontal) × 1,080 lines (vertical)
Speaker
Full range with speaker (mm)
box (2) (inches)
Dimensions with stand (mm) 1,278 × 797 × 350
(inches) 50
without stand (mm) 1,278 × 765 × 73
(inches) 50
wall-mount hole pattern (mm)
wall-mount screw size (mm)
Mass with stand (kg)/(lb.) 26.9/59.3
without stand (kg)/(lb.) 22.6/49.8
Supplied accessories See "Checking the accessories" .
Optional accessories Connecting cables / Support Belt Kit / Wall-Mount Bracket / TV Stand / 3D Glasses (TDG-BR100/TDG-
BR50) / 3D Sync Transmitter (TMR-BR100)
*2 Download Acquisition Mode (DAM) is used for software updates and/or collecting data for TV Guide On Screen.
• Optional accessories availability depends on its stock.
• Design and specifications are subject to change without notice.
KDL-40HX800/46HX800/55HX800
46HX800
167 W 149 W
14 W
(You may hear a clicking noise during the download but this is normal.)
54.6 inches
46 inches
(55 class)
34 × 160
3 3
1 / × 6 /
8 8
1,085 × 688 × 260
3 1 3 1
/ × 31 / × 42 / × 27 /
8 2 4 8
7 1
13 / 10 /
8 4
1,085 × 656 × 74
3 1 3 7
/ × 30 / × 42 / × 25 / × 3
8 8 4 8
7
2 /
8
4 0 0 × 3 0 0
M6
(length: refer to diagram on page 15.)
19.2/42.3
16.9/37.3
40HX800
132 W
40 inches
952 × 613 × 250
1 1
× 37 / × 24 / ×
2 4
7
9 /
8
952 × 581 × 74
1 7
37 / × 22 / × 3
2 8
3 0 0 × 3 0 0
16.4/36.2
14.2/31.3
SPECIFICATIONS
Checking the accessories
AC power cord (1)
1
Remote control (1)*
Size AAA batteries (2)
2
Table-Top Stand (1)*
Fixing screws for Table-Top Stand
(M5 × 16) (4)
Assembling screws for Table-Top Stand
(M5 × 16) (4) (KDL-40HX800 only)
3
Stand rear cover (1)*
*1 Please refer to the model name printed on the
remote control.
*2 KDL-40HX800 requires assembling.
Refer to other leaflet to assemble the Table-Top
Stand.
*3 For KDL-55/46HX800, the stand rear cover is
factory-attached to the Table-Top Stand.
2