Summary of Contents for Walkover Sprayers Yardmaster
- Page 1 Rambler Sprayer Handbook Operating Instructions & Parts List www.walkoversprayers.com sales@walkoversprayers.com Tel: 0845 521 1209 Fax: 01269 844636...
-
Page 2: Spray Width
(1016mm). In common with all aligned into the centre of the fixing clamp. Walkover sprayers, the spray pattern tails BEFORE tightening the clamp the machine off on the extreme edge of the treated... - Page 3 by removing the hose from the pump. This NOZZLE ASSEMBLY elbow is a snap fit and pulls out quite easily The diaphragm control valve assembly is at a slight angle. Rotate the drive wheel to fitted with a quick fit self- aligning cap. empty the pump and pipe work and When fitting the cap and nozzle, the self- reconnect the pipe into the pump.
- Page 4 WALKOVER Sprayers Ltd. disclaims any responsibility for misuse of any proprietary brand of chemical applied by a machine of their manufacture. All reasonable care is...
- Page 9 RAMBLER PARTS LIST: Item Number Quantity Part Number Description W1106 Main Frame W1619 Handle L/H W1633 Handle R/H W1130 M6 x 35 Hex Head Set Screw W1036 M6 Plain Washer W1041 M6 Nut W1108 Plate - Pump W1068 M4 Spring Washer W1043 M4 Nut W1113...
- Page 10 Conversion Tables To Convert Multiply Feet to metres 0.3048 Metres to feet 3.2808 Yards to metres 0.9144 Metres to yards 1.09361 Sq. metres to sq. feet 10.7639 Sq. Feet to Sq. Metres 0.092903 Sq. Yards to Sq. Metres 0.83612 Sq metres to sq. yards 1.19599 Acres to Hectares 0.40468...
- Page 12 RAMBLER Trouble shooting Guide. FAULTS ACTION TO TAKE 1. Nozzles failing to spray together. Check that the diaphragm control valve units are not over tightened. Slacken all control valve units and retighten finger tight, The idea of these units is to allow air to bleed from the spray boom when operating the machine.
- Page 13 5. Streaking- uneven spray pattern Remove as in 2 and clean or replace Material buildup on nozzle. Clean nozzle cut out, with stiff card. Preferably wash. Soak overnight in “Milton” sterilising solution. Nozzle incorrectly aligned. Release nozzle cap by turning the cap one half turn anti-clockwise, realign nozzle and retighten the cap.
- Page 14 The following are NOT covered under this GUARANTEE guarantee: Please return your completed Warranty (1) A NEW MACHINE- which has been information on the form provided. You subject to operation in excess of should also note the serial number of your recommended capacities, misuse, RAMBLER sprayer in this handbook .