Chart For Recording Values; Extended Menu - Hardi HC 2500 Series Instruction Book

Chart for recording values

Menu
[ Flow constant ]
[ Speed constant ]

Extended menu

Access the extended menu by pressing both arrow keys at the same
time until the menu changes.
The extended menu written in English only.
NOTE: Re-start the system after leaving the Extended menu.
Menu
[ Language ]
[ Unit ]
[ ON/OFF valve ]
[ Pressure system ]
[ Control box ]
[ Tank volume max ]
[ Analog adjust ]
[ Analog unit text ]
[ Regulation con. ]
[ Change SW ver. ]
[ Master reset ]
[ Area totals ]
[ Scanbox]
30
Function
Nozzle /Colour
Flow PPU
Speed UPP
Function [ choices ]
To select language.
[ GB, DK, F, E, D, Cz, SF, NL, I, S ]
To set unit of measurement. [ Metric, USA ]
To select EC or EVC/ESC/CB control unit.
[ Present, not present ]
To select pressure system.
[ Equalisation, No equalisation ]
To indicate control box connection to Scanbox.
[ Connected, Not connected ]
To pre-set tank volume indicated at start-up.
To calibrate the optional transducer.
[ max., min., offset in mA ]
To choose the unit of measurement.
[ Bar, PSI, deg C, deg F, % R.H ]
For the sensitivity of the pressure regulation
valve.
To permit change or update of software.
For factory use only.
To see total area covered and volume sprayed.
For factory use.
1 - Values 2 - Values 3 - Values