Summary of Contents for Macro Machines Storage Strip
Page 1
____________________________________________________ Storage and Recall Module_________________________________ The Storage Strip allows for saving and recalling settings in supported modules. You can manually recall stored settings using the lower group of 4 buttons. There are 4 banks of 4 stored settings, 4x4=16 total settings.
Page 2
Then press one of the bottom 4 mode/bank select buttons. These correspond to Forward, Reverse, Pendulum, and Random modes. By default the Storage Strip sequences through 4 steps within the selected bank. In order to enter 16 step mode hold the following buttons simultaneously:...
Page 3
Storage Strip are on the same busboard. A 2HP bus access utility module allowing chaining of the CV and Gate rails will be available soon. Warning: Do not install the Storage Strip on the same row as any Doepfer modules which are configured to send voltage to the CV/Gate bus.
Page 4
Machines. Macro Machines reserves the right to update any unit returned for repair and to change or improve the design of the ...