Sony Installation Guide KV-32FX65U Quick Start Manual page 2

Switching on the TV
1. Connect the TV plug to a mains socket, and switch on.
2. Push in the on/off switch on the front of the TV.
4
Automatically tuning the TV
When you first switch on the TV, the following sequence of menu screens appear on the TV enabling you to 1) choose a language for the TV menu
screens, 2) tune channels to the TV, 3) arrange the channels.
1. The Language/Country menu appears on the TV screen with the word 'English'
highlighted.
2. Press the v or V buttons on the remote control to select your chosen language then press
the OK button to confirm.
3. Press v or V to select the country in which you wish to operate the TV then press the OK
button to confirm your choice. Select 'OFF' if you do not want your channels stored in a
given channel sequence starting from programme position 1.
4. The 'autotune' menu appears on the TV screen in your selected language. Press the OK
button to confirm.
5. Ensure the aerial is connected as instructed, then press the OK button to confirm. The TV
starts to automatically search and store all available channels for you. This may take a few
minutes - please be patient and do not press any buttons.
6. Once the TV has tuned all available channels the 'Programme Sorting' menu appears on
the TV screen enabling you to change the order of the channels on your TV. If you wish to
change the channel order, press the v or V buttons to select the channel you want to move,
then press B. Press the v or V buttons to select the new programme number position for
your selected channel then press the OK button to confirm. The selected channel now
moves to its new programme position and the other channels move accordingly. Repeat this
procedure if you wish to sort the order of other channels on your TV.
7. Press the MENU button to remove the menu from the TV screen.
8. Press the PROGR+/- or the numbered buttons to view the TV channels.
Note: If you would like to stop the autotune process at any stage, press the OK button.
Finding your video channel
If you have connected a VCR to your TV, you now need to find your video channel.
1. Press the PROGR+/- buttons on the TV remote control until your video picture appears on the TV screen.
Note: If you wish to move your video channel to a different programme position, refer to the 'Re-arranging the TV channels'
section of the main instruction manual.
Your television stations are now stored in your television's memory.
5
Language/Country
Italiano
Français
Español
English
Language Deutsch
Dansk
Country
Čeština
Select Language: Confirm: OK
Language/Country
1 2 3
Greece
Great Britain
Germany 4 5 6
France
Language Finland
Denmark
Country
Czech Rep.
7 8 9
Select Country: Confirm: OK
0
: :
OK
: :
Programme Sorting
PROG CH LABEL
1 C03 TV 5
2 C05 PRO 7
3 C07 EU-SP
4 C08 SWF
5 C09 RTL
6 C11 SAT
7 C12 MDR
8 C13 DDI
9 C14 DSF
10 C15 RTL 2
11 C16 KAB 1
Select Prog: Confirm:
Programme Sorting
PROG CH LABEL
1 C03 TV 5 C03 TV 5
2 C05 PRO 7
3 C07 EU-SP
4 C08 SWF
5 C09 RTL
6 C11 SAT
7 C12 MDR
8 C13 DDI
9 C14 DSF
10 C15 RTL 2
11 C16 KAB 1
Select Position: Move: OK
6