Fematec 144PRO User Manual

144PRO-2013
Model: 144PRO
Floppy driver with below function needed:

Floppy driver with 34pin interface, and 5V DC power plug (example: SONY YE-DATA
ALPS TEAC EPSON PANASONIC NEC)

Use 2HD flpppy disk with 1.44MB capacity

Format of disk : Cylinders: 80
transfer rate: 500 kbps Encoding method: MFM.
Features:

Use normal usb flash drive as the medium for transfer design, support FAT16/FAT32 format.

34pin floppy driver interface, 5V DC power supply, easy to install.

Capacity: 1.44MB 2HD Cylinders: 80 Tracks: 160 Sectors/Track: 18 Bytes/Sector: 512 Data
transfer rate: 500 kbps Encoding method: MFM.

1.44MB built-in flash memory, with FAT12 format, used for cache data from usb flash drive.

Within 1.44MB capacity of Files in root directory or 999 folders can be searched.

Long file name and 4-level directory in 999 folders supported.

Jumpers with function for different machines.

100 disk image file supported. (used for machine with non FAT disk format, example for
make boot disk)
Panel:
8segment numbers: represent folder name
Green led: status of read and write operation
USB port: connect usb flash drive
Button:
When no usb flash drive pluged on emulator:
Left button used to rise ten-digit, right botton used to rise single-digit, press 2 button together to
rise hundred-digit, when the hundred-digit is 'b', the image mode used.
When an usb flash drive pluged on emulator:
Left button used to transfer data from built-in memory into usb flash drive, right button used to
transfer data from usb flash drive into built-in memory.
User manual
Floppy to USB emulator
Tracks: 160 Sectors/Track: 18 Bytes/Sector: 512 Data
+10 +1
FEMATEC creative innovations
Green Led