Subscribe to Our Youtube Channel
Summary of Contents for BCS VH-9680
- Page 2 Step 1: Unfold the solar panel on the jib, the back-jib or on top of the basket.
- Page 3 Step 2: Take out the brackets, strip and U-bolts.
- Page 4 Step 3: Put the strip on the side of the solar panels, covering both panels over 50%.
- Page 5 Step 4: Put the brackets on the edges of the panels, and extend them so they fit (marked red). The distance between the brackets is depending on the size of the basket.
- Page 6 Step 5: Remove the bold and nut (marked red) and fold the bracket in a vertical position. Do this on both brackets.
- Page 7 Step 6: Put the bold and nut back in the marked hole and screw tight. Do this on both brackets.
- Page 8 Step 7: Put the diagonal bracket in between the 2 rings, and screw the nut tight.
- Page 9 Step 8: Place the solar panel on the outside of the basket. Let it rest on the 2 U formed strips. Remember to always keep a hand on the panel to support it! Now lift it up a little bit and put in the U-bolts and screw them tight.
Need help?
Do you have a question about the VH-9680 and is the answer not in the manual?
Questions and answers