ON. in the engine revolution where there is no re- on the top of the tube. You may then wrap the If not, your NEXT Truggy will no longer be un- sistance. remaining wire around the tube.
Page 4
If you have some buddies that would like to get a NEXT Truggy of their own or already have The default needle setting of the carburetor is friends with other RC vehicles that you will be a good starting place for break-in.
After a minute remove the glow starter and blip pull the pull start. The first thing to check is you can wash out the engine with Trinity Nitro the throttle to make sure it is getting enough your glow plug. Remove the plug and put it in Blast RC4449 and lubricate it with Final Solu- fuel.
Trinity Products Inc. makes no other warranties expressed or implied. Trinity shall not be held liable for any damages resulting in the use of An easy way to remember is the oil is mixed with the fuel, so the more this product or any accessories and/or chemicals required to use this fuel you put through the engine the better lubricated it will be.
Page 22
NEXT PARTS LIST TRI30790 2.6 x 6mm Flat Head Screws (10) $0.99 TRI30791 2.6 x 8mm Flat Head Screws (10) $0.99 TRI40014 .095 Platinum Engine Standard $99.99 TRI30792 Rear Torque Set Bracket $1.29 TRI30568 Transmitter No Crystal $39.99 TRI30795 2.6 x 16mm Flat Head Screw (10) $0.99...
Page 23
$6.99 TRI32127 Front CVD (2) $29.99 TRI32128 Rear CVD (2) $29.99 TRI32130 2 Speed Transmission $29.99 TRI32105 Front Aluminum Shocks (2) $17.99 Due to ongoing R&D parts shown in drawings and pictures may differ from those on your NEXT Truggy.
Page 24
36 Meridian Road Edison, NJ 08820 732.635.1600, www.teamtrinity.com...
Need help?
Do you have a question about the NEXT and is the answer not in the manual?
Questions and answers