Advertisement
Quick Links
Advertisement
Summary of Contents for Bundutec BunduAwn
- Page 1 BUNDuawn MANUAL...
- Page 2 TO GET THE FULL BENEFIT OF YOUR GUARANTEES AND WARRANTIES, PLEASE READ THE MANUAL IN ITS ENTIRETY The BunduAwn standard sizes are 2.45, 2.75 and 2.95 m, which is the length of the back plates. You can order a custom sized awn of up to 4m long.
- Page 3 INCLUDES It boasts: • Manual operation • Shade awning around all three sides of the the vehicle. • Additional lifter arms add 500mm of drop for increased water run off • Aluminised to reflect heat away • Cool even in direct sunlight •...
- Page 4 Various profiles The Standard 360 We call this awn the 360 because it wraps around your vehicle. It comes in a 2.45, 2.75 and a 2.95 size. Each arm has guy ropes to tie down in poor weather. We HIGHLY recommend this profile, since the design works in triangles. The forces spread over the triangle design gives it more rigidity and strength.
- Page 5 The L-Shape 270 Square Back We call this awn the 270 L Shape Square back because of its obvious shape. It has an additional triangle stiched in to make it sqare at the back. It comes in a 2.45, 2.75 and a 2.95 size. The front left arm has a support pole to give additional support since the triangular structure has been compromised.
-
Page 6: How Does It Work
How does it work? The awning works with five to six arms which, when open, allows coverage of 2 or 3 sides of your vehicle. The arms work in a triangular force which gives the awning more strength. By covering three sides the triangular structure is complete and gives additional structural support. - Page 7 Flexible Fitment: When doing a fitment for a more flexible awn: Roofrack Flat Bar On longer awnings, or awnings mounted to both a cab and a canopy the brackets need to be able to flex more due to the cab and the canopy flexing independently. We also recommend fitting flexible brackets on custom longer length awns to accommodate more flexibility.
- Page 8 • Arms should be more or less 90° with your roofrack. • Hook the lead rope onto your roofrack and tighten at the cam buckle. Hook onto roofrack and tighten Check that arm is more or less at cambucle 90 deg to the awning •...
- Page 9 To close the awning follow the opening procedure in reverse. The better you fold the canvas, the easier it will be to close the zip. Fold the first arm UNDER the canvas so that the 2 arms are flush with the backing plate. The fitment procedure for our awnings are all the same, so should your awn look different than the one in the manual please note that the same principles apply.
- Page 10 The guy on the video is very tall. After a few practice runs you should be able to close it just as fast. The trick to closing the BunduAwn is that the arm should go UNDER the canvas. You will see when he has lined up the arms from one side he lifts the bulk of the canvas over it, and repeats with the other side.
- Page 11 Can I add additional patched/loops and D-rings to strengthen my awning? Adding any additional strengtheners are not necessary. Our products are designed to be lightweight but strong and durable and we offer services and repairs for your product for years to come. I don’t like the color of the awning, can I order another color? Unfortunately we don’t carry various stock.
- Page 12 By phoning the office, Front Desk can follow up on all calls and make sure they are attended to. South Africa BunduTec Front Desk Tel: +27 6 3782 7667 Email: info@bundutec.co.za Australia Bundutec Australia Tel: +61 414 500 430 Email: sales@bundutec.com.au United Arab Emirates...
Need help?
Do you have a question about the BunduAwn and is the answer not in the manual?
Questions and answers