Microwave Cooking Principles; Grounding Instructions - Brabantia BBEK1145 Instruction Manual

similar equipment.
When there is interference, it may be reduced or eliminated by taking the following
measures:
1. Clean door and sealing surface of the oven.
2. Reorient the receiving antenna of radio or television.
3. Relocate the Microwave Oven with respect to the receiver.
4. Move the Microwave Oven away from the receiver.
5. Plug the Microwave Oven into a different outlet so that Microwave Oven and
receiver are on different branch circuits.

MICROWAVE COOKING PRINCIPLES

1. Arrange food carefully. Place thickest areas towards outside of dish.
2. Watch cooking time. Cook for the shortest amount of time indicated and add more
as needed. Food severely overcooked can smoke or ignite.
3. Cover foods while cooking. Covers prevent splattering and help foods to cook
evenly.
4. To speed up cooking of foods such as chicken and hamburgers, turn the food over
once during microwave cooking. Large items like roasts must be turned over at least
once.
5. Rearrange foods such as meatballs halfway through cooking both from top to
bottom and from the center of the dish to the outside.

GROUNDING INSTRUCTIONS

This appliance must be grounded. This oven is equipped with a cord which has a
grounding wire with a grounding plug. It must be plugged into a wall receptacle that is
properly installed and grounded. In the event of an electrical short circuit, grounding
reduces risk of electric shock by providing an escape wire for the electric current. It is
recommended that a separate circuit serving only the oven be provided. Using a high
voltage is dangerous and may result in a fire or other accident causing oven damage.
WARNING: Improper use of the grounding plug can result in a risk of electric shock.
NOTE:
1. If you have any questions about the grounding or electrical instructions, consult a
qualified electrician or service person.
2. Neither the manufacturer nor the dealer can accept any liability for damage to the
oven or personal injury resulting from failure to observe the electrical connection
procedures.
The wires in this cable main are colored in accordance with the following code:
Green and yellow = Earth
Blue = Neutral
Brown = Live