Bauknecht TRPC 86531 Instructions For Use Manual page 42

Below is a summary of possible failure causes and
solutions.
If the problem persists after having followed the
instructions as indicated below, press and hold On/
O for at least three seconds. If afterwards the failure
indication still appears, switch o and unplug the dryer
and contact our After-Sales Service.
Failure Indicator Display message
F01 to F04
F05 to F09
F10 to F24
34
Possible Cause
Failure of a component
Failure of a component
Failure of a component
Solution
Press and hold On/O for at least
3 seconds.
Switch off and unplug the dryer.
Immediately open the door
and take out the laundry, so
that the heat can dissipate.
Make sure that the ambient
temperature ranges between
5°C and 35°C. Wait for about an
hour. Plug in the dryer, load the
laundry and start the programme
again.
If the failure persists, call the
After-Sales Service.
Switch off and unplug the dryer.
Wait for about half an hour.
Plug in the dryer and start the
programme again.
If the failure persists, call the
After-Sales Service.