Panasonic DP-UB9000 Basic Operating Instructions Manual page 5

∫ Front
1
1 Standby/on switch (Í/I)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
2 Disc tray
3 Remote control signal sensor
Distance: Within approx. 7 m
Angle: Approx. 20e up and down, 30e left and
right
CAUTION
Do not place objects in front of the unit. The disc tray may collide with objects when it is opened, and
this may cause malfunction.
≥ When inserting a media item, ensure that it is facing the correct way, which is the right side facing up.
≥ If you connect a Panasonic product with a USB connection cable, the setup screen may be displayed on the connected
equipment. For details, refer to the instructions for the connected equipment.
∫ Rear
7 8
1 2
1 LAN port
2 HDMI AUDIO OUT terminal
3 HDMI VIDEO OUT terminal
4 USB port (HDD) (5 V DC 900 mA)
This port supports USB 3.0 Super-Speed.
5 DIGITAL AUDIO OUT terminal
(OPTICAL/COAXIAL terminal)
6 Analogue AUDIO OUT terminals
7 Wireless LAN antenna
8 Cooling fan
2
3
 
9
3 4 5
5
4
4 Display
5 Disc tray open/close button
6 Basic playback control buttons
7 USB port (5 V DC 500 mA)
This port supports USB 2.0 High Speed.
 
10
6
9 2ch AUDIO OUT terminals
a BALANCED terminals
b AUDIO OUT terminals
10 7.1ch AUDIO OUT terminals
11 AC IN ( ) terminal
The symbols on this product represent the following.
AC
DC
Class II equipment (The construction of the product
is double-insulated.)
6 7
9 11
TQBS0280
5