Advertisement
Air caps
(See Fig. 5 and 6)
The air caps are tested and certified according to the SEAVA meth-
od. This gives a "finger print" of the spray pattern on each air cap.
For further information please contact your supplier.
The retaining ring for the air cap shall only be tightened with hand force.
No tools are required. Especially important when a cap cleaner is used.
Fix 2 on the air cap, denotes that the air cap can be installed in ver-
tical or horizontal position, depending on the position of the pin in the
distribution ring
(See Fig. 5 and
Fix 4 on the air cap, denotes that the air cap can be installed in ver-
tical or horizontal position, regardless off the position of the pin in the
distribution ring.
Air caps can be sent back for checking and comparity the
performance. For further interesting please contact your supplier.
Automatic spray guns Ecco 70AP
23
22
7
20
Fig. 7
6
6).
21
19
The position of guide pin for Horizontal Pattern
Air cap
Retaining ring
Fig. 5
The position of guide pin for Vertical Pattern
Guide Pin
Retaining ring
Fig. 6
Air cap
9
8
7. Paint needle
19. Packing screw
8. Piston
20. Distribution ring
21. Purge insert
9. Packing screw
Guide pin
65130 F257
Distribution-ring
65130 F258
Distribution ring
65130 F266
22. Paint nozzle
23. Air cap
Advertisement
