Sony STR-DE1075 Primary Operating Instructions Manual page 18

Multi channel surround setup
(continued)
Initial settings
Parameter
FRONT
CENTER
SURROUND
SURR BACK
SURR BACK L/R
SUB WOOFER
FRONT XX.X feet
CENTER XX.X feet
SURROUND XX.X feet
SURR BACK XX.X feet
SUB WOOFER XX.X feet
S.W PHASE
DISTANCE UNIT
SURR POSI.
SURR HEIGHT
SURR BACK HGT.
FRONT SP > XXX Hz
CENTER SP > XXX Hz
SURROUND SP > XXX Hz
SURR BACK SP > XXX Hz
LFE HIGH CUT > XXX Hz
x Front speaker size (FRONT)
• If you connect large speakers that will
effectively reproduce bass frequencies, select
"LARGE". Normally, select "LARGE".
• If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select "SMALL" to activate
the bass redirection circuitry and output the
front channel bass frequencies from the sub
woofer.
• When the front speakers are set to "SMALL",
the center, surround, and surround back
speakers are also automatically set to
"SMALL" (unless previously set to "NO").
18
Initial setting
LARGE
LARGE
LARGE
LARGE
NO
YES
16 feet
16 feet
11 feet
11 feet
16 feet
NORMAL
FEET
SIDE
LOW
LOW
STD (120 Hz)
STD (120 Hz)
STD (120 Hz)
STD (120 Hz)
STD (120 Hz)
x Center speaker size (CENTER)
• If you connect a large speaker that will
effectively reproduce bass frequencies, select
"LARGE". Normally, select "LARGE".
However, if the front speakers are set to
"SMALL", you cannot set the center speaker to
"LARGE".
• If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select "SMALL" to activate
the bass redirection circuitry and output the
center channel bass frequencies from the front
speakers (if set to "LARGE") or sub woofer.*
• If you do not connect a center speaker, select
"NO". The sound of the center channel will be
output from the front speakers.*
• If you use the center speaker in the 2nd room,
select "2ND ROOM". When the center speaker
is set to "2ND ROOM", the surround back
speaker is also automatically set to "2ND
ROOM" (unless previously set to "NO").
x Surround speaker size (SURROUND)
• If you connect large speakers that will
effectively reproduce bass frequencies, select
"LARGE". Normally, select "LARGE".
However, if the front speakers are set to
"SMALL", you cannot set the surround
speakers to "LARGE".
• If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select "SMALL" to activate
the bass redirection circuitry and output the
surround channel bass frequencies from the sub
woofer or other "LARGE" speakers.
• If you do not connect surround speakers, select
3
"NO".*
Tip
*1–*3 correspond to the following Dolby Pro Logic
modes
*1 NORMAL
*2 PHANTOM
*3 3 STEREO
1
2