Download
Share
Print this page
  1. Manuals
  2. Brands
  3. AEBOS Technology Manuals
  4. Power Screwdriver
  5. ALS-368L
  6. Operating and safety instructions manual

AEBOS Technology ALS-368L Operating And Safety Instructions Manual

3.6v li-ion cordless screwdriver
Hide thumbs

Advertisement

Quick Links

Download this manual
A
L
S
-
3
6
8
L
A
L
S
-
3
6
8
L
Operating and safety instructions
3.6V Li-ion cordless screwdriver

Advertisement

loading
Need help?

Need help?

Do you have a question about the ALS-368L and is the answer not in the manual?

Questions and answers

Summary of Contents for AEBOS Technology ALS-368L

  • Page 1 Operating and safety instructions 3.6V Li-ion cordless screwdriver...
  • Page 2 Attention! Always follow the safety rules and instructions in this manual. The manufacturer will not accept any responsibility for damage or injury caused by improper use or not in keeping with the requirements of the operating instructions of this tool. Diagram Descriptions Bit insertion...
  • Page 4 Foreword This brand new 3.6V Li-ion cordless screwdriver is designed for driving tighten and loosen screws. Its built-in new battery tech- nology and more efficient motor make cordless screwdriver to in- crease working time, greater power, lighter weight, long cycle life,...

  • Page 5: Technical Data

    This handy tool withegregious soft grip handle and light for poorly lit areas ensure to enjoy works as well as enjoy your life. Technical data Model ALS-368L Dimension 158mm x 120mm x 43mm Rated voltage DC 3.6V No-load speed.

  • Page 6: Follow These Instructions

    General Safety Rules WARNING! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool.
  • Page 7 b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
  • Page 8 Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. c) Avoid accidental starting. Ensure the switch is in the the charger off position before plugging in . Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents.
  • Page 9 on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. charger c) Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
  • Page 10 h) Release trigger switch immediately when a screw is Fastened withy no rotating.Stop pushing trigger when Loosening a screw with no turing within 5 seconds. Improper stress on a cordless screwdriver will cause dmage to motor. 5) Battery tool use and care a) This is a built-in type battery screwdriver,if something damaged,do not attempt to open the housing of this screwdriver,take it to a skilled service...
  • Page 11 the safety of the power tool is maintained. Additional safety instructions WARNING! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. ■ This Li-ion cordless screwdriver is designed built-in battery. Do not attempt to open or disassemble the battery or remove any component projecting from the battery terminal.
  • Page 12 Safety rules for battery charger ■ Do not expose battery charger to rain, moisture or snow. The penetration of water in a battery charger increases the risk of electric shock. ■ Keep the battery charger terminal clean. Contamination may cause the danger of electric shock ■...
  • Page 13 ■ The Li-ion battery is protected against deep discharging. When the battery is hungry, the LED on the switch flash twice by means of protective circuit. The tool holder no longer rotates Note! If the On/Off switch is subject to continued use, the Li-ion battery can be damaged.
  • Page 14 Use attached bit holder to hold 25 mm holder. Note! bits ,do not use double-end crewdriver bits which are long than 25mm. ■ Caution! Apply the power tool to the screw/nut only when it is switched off. ■ On/Off switch: To switch on the screwdriver by pressing On/Off switch and keep it depressed.
  • Page 15 Maintenance ■ This Li-ion cordless screwdriver is maintenance-free. ■ Store idle tool in a cool, dry place where they are protected from frost. Do not store this tool where temperatures may exceed 120°F (49°C) such as in a vehicle, domestic heaters, direct sunlight or metal building during the summer.
  • Page 16 We : AEBOS Technology Co. Ltd. 60851 No. 67, Chung Cheng Rd, Shuishang Hsiang Chia Yi County, Taiwan, R.O.C. here with declare that the following machine complies with the appropriate basic safety and health requirements of the EC Directive based on its design and type, as brought into circu- lation by us.