Block CVR-200 Manual page 28

Adapting external Remote controls
Your CVR-200 can learn the codes from other remote controls, e.g. from a TV remote control. Proceed as
follows:
•
Press the „Menu" button on the appliance for 3 seconds, then the device enters the learning mode
•
„Press on Block FB button" will appear on the display. Press a button on the remote control to select a
function to transfer.
•
The following appears on the display: „Code from Block FB accepted" and shortly afterwards „Please
press external FB key". Now press the button on the extern remote control to release the function to be
transferred.
•
„Key code has been transmitted" appears on the display. Then it jumps back to fist point.
•
Repeat these steps until all functions (max. 50) have been transferred to your remote control unit. Exit
the programming by pressing again the „Menu" button on the device. If you have programmed a key
incorrectly, simply repeat all steps with the right keys, the device will overwrite the faulty settings.
•
To delete all programs, press and hold the keys „Back" on the device, and then restart the device com-
pletely.
54
Connect external devices via Bluetooth ®
Your device is equipped with a modern Bluetooth® interface. This allows you to pair any Bluetooth® source
with the CVR-200. Possible sources are smartphones (iOS, Android, Windows Phone), Tablet PCs (iOS, Andro-
id, Windows 8) or media players (iPod, similar) with Bluetooth® function. Connecting external devices via Blu-
etooth® Your device is equipped with a modern Bluetooth® interface. Through this you can pair any Bluetooth
source with the CVR-200. Possible sources with Bluetooth function are smartphones (iOS, Android, Win-
dows Phone), tablets (iOS, Android, Windows 8) or media players (iPod, similar). To activate the Bluetooth®
function, press the „Source" button until Bluetooth® appears on the display, then activate the Bluetooth
function on your external device. Pair an external device with the CVR-200: On your external device, search for
Bluetooth devices in your surroundings, select your CVR-200 and begin the pairing (coupling the devices) In
case of problems, or if you need further information about the pairing, please consult the instruction manual
of the device you wish to pair with your CVR-200. Afterwards you can activate the music playback function of
your external device and your CVR-200 will play the music. Please note that you can only link sources using
the built-in Bluetooth function. The pairing of, for example, external speakers to the CVR-200 is not possible!
Connect your Bluetooth headset to the CVR-200
With the CVR-200 you have the possibility to connect a Bluetooth headset via Bluetooth. Please switch your
headphones to the parry mode. press the „BT Headphone Parring" button on the device. Then press the button
again and your CVR-200 will now search for your Bluetooth output device. In this mode the CVR-200 connects
automatically. If you would like to deactivate the parring mode again, please hold down the button „BT Headphone
Parring" for approx. 3 seconds.
55