Miki Pulley PSL-K Instruction Manual

Posi lock

Hide thumbs

PSL-K/PSL-K-B/PSL-K-C/PSL-K-F

This manual is common to standard, hexagon head bolt type, basic antirust type, and stainless

steel type.

Before use this product, read the instruction manual carefully and use the product safety and correctly.

1. Before using..............................................................................P1

2. Safety Precaution....................................................................P2

3. Installation procedure ...........................................................P4

4. Removal ....................................................................................P6

5. Other notes ..............................................................................P6

1.Before using

1-1After opening the package

First, please check the following points.

1) Is the product what you ordered?

2) Is the product damaged during transportation?

1-2 Structure and parts

The main part consists of three parts. "Outer sleeve / Inner sleeve / Clamping bolt''

POSI LOCK

Instruction Manual

If any problems are found, please contact your supplier.

Clamping bolt

Inner sleeve

TRS-PSK-003-01/MD-000074185A

Detaching screw hole

－1－

Outer sleeve

Table of Contents

Need help?

Do you have a question about the PSL-K and is the answer not in the manual?

Questions and answers

Summary of Contents for Miki Pulley PSL-K

Page 1 TRS-PSK-003-01/MD-000074185A POSI LOCK PSL-K/PSL-K-B/PSL-K-C/PSL-K-F Instruction Manual This manual is common to standard, hexagon head bolt type, basic antirust type, and stainless steel type. Before use this product, read the instruction manual carefully and use the product safety and correctly. 1. Before using……………………………………………………………………P1 2.
Page 2 1-3 Part quality of the material PSL-K: Standard Sleeve: equivalent of S45C thermal refining Clamping bolt: SCM435, Black oxide finish PSL-K-B: Hexagon bolt type Sleeve: equivalent of S45C thermal refining Clamping bolt: SCM435, Black oxide finish PSL-K-C: Basic antirust type...
Page 3 Always use a calibrated torque wrench and clamp at the tightening torque specified by Miki Pulley. It is very dangerous if the driving part starts by accident while mounting the product. Be sure that the main power of the equipment is turned off.
Page 4 Apply lock tight equally to each clamping bolt, and tighten each clamping bolt diagonally from each other. Then, tighten all of the clamping bolts to the specified torque by using a torque wrench. The material used for the clamping bolt of the PSL-K-F is stainless steel and easily －4－...
Page 5 70% of the values indicated. Figure.1 Figure.2 Clamping bolt tightening torque PSL-K / PSL-K-B / PSL-K-C Clamping bolt Tightening torque Detaching PSL-K/-B/-C...
Page 6 Please contact us using the inquiry form and be aware that support for inquiries received on Saturdays, Sundays, holidays, New Year's, and summer business holidays will be provided on the next business day. Contact by phone Japanese/English Miki Pulley International Business Department TEL +81-46-257-5109 －6－...

This manual is also suitable for:

Psl-k-bPsl-k-cPsl-k-f