There are four classes of settings for individually configuring the Avalon CTS:
• Bed Label setting (refer to Instructions for Use)
• C = Configuration settings (refer to Instructions for Use)
• F = Function settings
• A = Action settings
The C and F settings can be set:
– using a PC with the Service Support Tool installed. This is the recommended method.
– manually, using the keys on the base station.
The A settings can only be set manually, using the keys on the base station.
Configuration Settings
The Instructions for Use describes how to manually change the theft protection level (C1), theft protection
alert volume (C2), key click volume (C3), audible alert volume (C4) and acoustical alarmdefault (C5).
To Purchase, Visit
Avobus.com
Changing Settings
8
or call
1-800-674-3655
8
79